Quick assessment methodology for reliability of solder joints in ball grid array (BGA) assembly—Part I: Creep constitutive relation and fatigue model

In this study, a new unified creep constitutive relation and a modified energy-based fatigue model have been established respectively to describe the creep flow and predict the fatigue life of Sn−Pb solders. It is found that the relation successfully elucidates the creep mechanism related to current constitutive relations. The model can be used to describe the temperature and frequency dependent low cycle fatigue behavior of the solder. The relation and the model are further employed in part II to develop the numerical simulation approach for the long-term reliability assessment of the plastic ball grid array (BGA) assembly. The project supported by the National Natural Science Foundation of China (59705008)     

染料木素分子印迹聚合物的制备及其识别性能

以染料木素为模板分子、4-乙烯基吡啶(4-VP)为功能单体、乙二醇二甲基双丙烯酸酯(EGDMA)为交联剂、四氢呋喃(THF)为溶剂,采用本体聚合法制备了染料木素的分子印迹聚合物;采用静态平衡结合实验研究了该分子印迹聚合物对染料木素的结合能力和选择性能.结果表明,与化学组成相同的相应非印迹聚合物相比,染料木素分子印迹聚合物对染料木素的吸附性能和选择性更好.利用所合成的分子印迹聚合物作为固相萃取材料填充固相萃取小柱,可以选择性地从豆奶粉中分离、富集染料木素;此外,该分子印迹聚合物还有望用于其他豆制品的分析检验.     

离子色谱法测定甲醇和噻吩中硫、氯含量

建立了测定工业用甲醇和噻吩中硫、氯含量的离子色谱检测方法。样品经(700±25)℃灼烧后,残留物用蒸馏水洗涤,利用离子色谱仪进行分析。甲醇和噻吩中硫、氯检测结果的相对标准偏差为1.04%~1.26%,加标回收率为99.2%~101.2%。该方法操作简单,精密度和准确度高,可用于大部分可燃性有机化合物中硫、氯含量的检测。     

Synthesis and liquid crystalline properties of substituted 2,5‐diaryl 1,3,4‐oxadiazole derivatives without flexible chains

A series of new compounds based on aromatically 2,5‐disubstituted 1,3,4‐oxadiazoles without flexible chains, formulated as p‐R–C₆H₄–(OC₂N₂)–(p‐C₆H₄)₂–R′ with (i) R = CH₃O, R′ = CH₃O, CH₃S, F, H (Ia–Id), (ii) R = CH₃S, R′ = CH₃O, CH₃S, F, H (IIa–IId) and (iii) R = F, R′ = CH₃O, CH₃S, F, H (IIIa–IIId) (p‐C₆H₄ and OC₂N₂ represent a p‐phenylene spacer and a 1,3,4‐oxadiazole ring, respectively), were synthesised and characterised by ¹H and ¹³C NMR, MS and HRMS techniques. Mesomorphic properties were investigated using differential scanning calorimetry and polarizing optical microscopy. All of the target compounds (except Id, IId, IIIc and IIId) exhibited an enantiotropic nematic mesophase with high melting temperatures. The liquid crystalline properties of these compounds were influenced greatly by polarity, steric factors and positions of the terminal groups. The effect of the terminal groups on the liquid crystal properties is discussed.     

超疏水表面液滴的振动特性及其与液滴体积的关系

超疏水表面液滴的振动特性与接触线的移动、液滴体积、基底振幅等因素密切相关.本文在基底振幅较小且恒定的条件下,研究了超疏水表面液滴的共振振幅、模式区间、共振频率等振动特性及其与液滴体积(20—500μL)的关系.此外,将基于一般性疏水表面建立的Noblin共振频率计算模型应用于超疏水表面,并提出“虚驻点”的概念,借此对模型进行了误差分析和修正.研究表明:1)共振时,液滴高度变化率即比振幅随体积增大而增大,随阶数增大而减小;2)各模式区间的起止频率首尾相接,其范围随体积增大而减小;3)液滴体积越大,共振频率越小,随着阶数增大,共振频率f与体积V的关系趋于f-V^–0.4,不同于一般性疏水表面上的f-V^–0.5;4)直接应用Noblin模型计算共振频率会产生较大误差,主要原因在于液滴表面波波段数量统计存在较大偏差,而修正后的模型可以准确计算超疏水表面大体积液滴的共振频率.     

Oxy-coal combustion in a 30 kWth pressurized fluidized bed: Effect of combustion pressure on combustion performance,pollutant emissions and desulfurization

Oxy-coal combustion with pressurized fluidized beds has recently emerged as a promising carbon capture and storage (CCS) technology for coal-fired power plants. Although a large number of energy efficiency analyses have shown that an increase in combustion pressure can further increase the net plant efficiency, there are few experimental studies of pressurized oxy-coal combustion conducted on fluidized bed combustors/boilers with continuous coal feeding. In this study, oxy-coal combustion experiments with lignite and anthracite were conducted with a 30 kW_th pressurized fluidized bed combustor within the pressure range of 0.1 MPa to 0.4 MPa. The investigation focused on the elucidation of the impacts of combustion pressure on the combustion performance, pollutant emissions and desulfurization of oxy-coal combustion in fluidized beds. The results showed that an increase in pressure increased the combustion efficiency and combustion rate of coal particles, and the promoting effect of pressure increase was more significant for the high rank coal with smaller particle size and the high O₂ concentration atmosphere. For both coals, NO_x emissions decreased with pressure but N₂O emissions increased with pressure and accounted for a considerable part of the nitrogen oxide pollutants under high pressure oxy-coal combustion conditions. The pressure had insignificant impact on the SO₂ emissions of oxy-coal combustion but an increase in pressure enhanced the direct desulfurization of limestone.     

LES study of diesel flame/wall interaction and mixing mechanisms at different wall distances

In this paper, the flame-wall interaction of reacting diesel spray under engine like conditions is investigated using large eddy simulations. The aim of this study is to understand the influence of the distance between the wall and the spray nozzle on the air entrainment rate, which is a key variable in formation/oxidation process of soot. Three experimental cases are investigated, a free jet case and two wall impingement cases with a distance from nozzle to wall of 30 mm and 50 mm, which are considered as characteristic wall impingement distances for light- and heavy-duty bores in diesel engines, respectively. The optical soot measurements imply a positive influence of wall on the rate of soot oxidation. Numerical simulations are employed to elucidate importance of different mechanisms for the air entrainment, i.e., air entrainment prior to flame lift-off position, enhanced mixing due to the wall impingement and enhanced mixing by the entrainment wave. The results show that oxidation process after the end of injection is driven by a different mixing mechanism depending on the distance to the wall. The 30 mm case resulted in a “mixing boost”, where the dominant mixing mechanism is the wall impingement vortex mixing, which gives rise to the fastest soot decay among the cases. The mixing in the 50 mm case is governed by a late wall impingement vortex mixing, giving rise to a low, but a constant air entrainment rate, i.e., a “mixing plateau”. The free jet case resulted in mixing governed by the entrainment wave mechanism. Both wall impingement cases have faster soot oxidation rate compared with the free jet case, but due to a different underlying mixing process. LES is shown to be able to replicate the line-of-sight measurements of natural OH* chemiluminescence and distribution of soot region from the optical soot diagnostics.     

SH wave propagation in a piezoelectric/piezomagnetic plate with an imperfect magnetoelectroelastic interface

In this paper, we investigate the SH wave propagation in a layered piezoelectric (PE) and piezomagnetic (PM) plate with an imperfect magnetoelectroelastic interface. A linear magnetoelectroelastic spring model is used to describe the weakness of the imperfect interface. On the basis of this model, dispersion curves and mode shapes of the SH waves are computed. In particular, a PZT-5A/CoFe₂O₄ composite plate is considered in the numerical examples to calculate the dispersion curves and the mode shapes for different combinations of the magnetic, electrical and elastic spring constants. The effects of the layer thickness ratio and the electric-magnetic boundary conditions on the dispersion curves are discussed in details. Our results show that for a general weak bonding case, the high modes of the dispersion curves are not monotonous in the range of small wave numbers. With the layer thickness ratio increasing, the wave velocities of the SH waves increase. The electric boundary conditions mainly determine the dispersion curves of the SH waves in the case of a small layer thickness ratio, i.e. a large thickness of the PE layer. The present results have relevant applications in the nondestructive testing and evaluation of the layered PE/PM plate-like wave devices.     

A Normal Criterion Concerning Omitted Holomorphic Function

In this paper, we continue to discuss the normality concerning omitted holomorphic function and get the following result. Let F be a family of meromorphic functions on a domain D, k ≥ 4 be a positive integer, and let a(z) and b(z) be two holomorphic functions on D, where a(z) 0 and f(z) ≠ ∞ whenever a(z)=0. If for any f ∈ F, f'(z) -a(z)f^k(z) ≠ b(z), then F is normal on D.     

Production, Characterization, and Application of an Organic Solvent-Tolerant Lipase Present in Active Inclusion Bodies

An organic solvent-tolerant lipase from Serratia marcescens ECU1010 (rSML) was overproduced in Escherichia coli in an insoluble form. High concentrations of both biomass (50 g cell wet weight/L culture broth) and inclusion bodies (10.5 g/L) were obtained by applying a high-cell-density cultivation procedure. Activity assays indicated that the enzymatic activity of rSML reached 600 U/L. After treatment with isopropyl ether for 12 h, the maximum lipase activity reached 6,000 U/L. Scanning electron microscopy and Fourier transform infrared microspectroscopy revealed the activation mechanism of rSML in the presence of organic solvents. rSML was stable in broad ranges of temperatures and pH values, as well as in a series of organic solvents. Besides, rSML showed the best enantioselectivity for the kinetic resolution of (±)-trans-3-(4-methoxyphenyl)glycidic acid methyl ester. These features render the S. marcescens ECU1010 lipase attractive for biotechnological applications in the field of organic synthesis and pharmaceutical industry.